Compatibility with Yuneec Power Distribution board

I finally received my Myxa ESC’s which I am planning to use with an Intel Aero compute board, via CANBUS.

I am in the process of determining the pin assignment on the Power Distribution board that came with the Intel Ready to Fly drone . Intel never documented Yuneec’s ESC’s and PDB’ signals . There are 4 pins, and I believe two are power and two are data lines:

http://us.yuneec.com/Aero-Drone-Power-Distribution-Board-for-Aero-RTF-Drone

Yuneec Power Distribution Board connector

We are not familiar with that device, so can’t comment, sorry. Consider connecting Myxas directly to the battery via T-connectors.