# Zubax GNSS 1 how to use CLI

**URL:** <https://forum.zubax.com/t/zubax-gnss-1-how-to-use-cli/1002>\
**Category:** Sensors\
**Created:** [July 1, 2018, 6:47am UTC](https://forum.zubax.com/t/zubax-gnss-1-how-to-use-cli/1002 "2018-07-01T06:47:02Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![XieFengXiYu00](https://forum.zubax.com/user_avatar/forum.zubax.com/xiefengxiyu00/32/187_2.png) [@XieFengXiYu00](https://forum.zubax.com/u/XieFengXiYu00)\
**Post date:** [July 1, 2018, 6:47am UTC](https://forum.zubax.com/t/zubax-gnss-1-how-to-use-cli/1002/1 "2018-07-01T06:47:03Z")

</div>

I have a gnss1.0 firmware, I can enter the serial command line interface，the official website is a 2.0 tutorial, what should I do. Thank you！

 ![image](https://forum.zubax.com/uploads/default/original/1X/59ecd595d20864690bc713b557da926de8508e7c.png)

---

<div class="post-metadata">

**Author:** ![pavel-kirienko](https://forum.zubax.com/user_avatar/forum.zubax.com/pavel-kirienko/32/180_2.png) [@pavel-kirienko](https://forum.zubax.com/u/pavel-kirienko)\
**Post date:** [July 2, 2018, 7:54am UTC](https://forum.zubax.com/t/zubax-gnss-1-how-to-use-cli/1002/2 "2018-07-02T07:54:41Z")

</div>

This should help: [https://docs.zubax.com/zubax\_gnss](https://docs.zubax.com/zubax_gnss)

---

<div class="post-metadata">

**Author:** ![XieFengXiYu00](https://forum.zubax.com/user_avatar/forum.zubax.com/xiefengxiyu00/32/187_2.png) [@XieFengXiYu00](https://forum.zubax.com/u/XieFengXiYu00)\
**Post date:** [July 2, 2018, 9:10am UTC](https://forum.zubax.com/t/zubax-gnss-1-how-to-use-cli/1002/3 "2018-07-02T09:10:00Z")

</div>

Thank you, I will read it first