# Questions about the firmware

**URL:** <https://forum.zubax.com/t/questions-about-the-firmware/1370>\
**Category:** Electric drives\
**Created:** [July 9, 2019, 3:38am UTC](https://forum.zubax.com/t/questions-about-the-firmware/1370 "2019-07-09T03:38:11Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![MIKEFENG](https://forum.zubax.com/user_avatar/forum.zubax.com/mikefeng/32/276_2.png) [@MIKEFENG](https://forum.zubax.com/u/MIKEFENG)\
**Post date:** [July 9, 2019, 3:38am UTC](https://forum.zubax.com/t/questions-about-the-firmware/1370/1 "2019-07-09T03:38:11Z")

</div>

I downloaded the firmware at GITHUB. Why BOOTLOAD can make make a success directly, but there are many errors and problems when making the firmware make? For example, now. It prompts me: zubax\_chibios//\_rules\_armcm.mk:35: \*\*\* USE\_PROCESS\_STACKSIZE is not defined. Stop.  
When I open \_rules\_armcm.mk, this is the case.  
34 ifndef USE\_PROCESS\_STACKSIZE  
35 $(error USE\_PROCESS\_STACKSIZE is not defined)  
36 endif  
I don’t know where USE\_PROCESS\_STACKSIZE should be defined.  
Is it a problem with my system or where is the problem.  
THINKS.

---

<div class="post-metadata">

**Author:** ![pavel-kirienko](https://forum.zubax.com/user_avatar/forum.zubax.com/pavel-kirienko/32/180_2.png) [@pavel-kirienko](https://forum.zubax.com/u/pavel-kirienko)\
**Post date:** [August 1, 2019, 11:16pm UTC](https://forum.zubax.com/t/questions-about-the-firmware/1370/2 "2019-08-01T23:16:11Z")

</div>

Remove the archive you have downloaded from GitHub and clone the repository properly instead:

```auto
git clone --recursive https://github.com/PX4/sapog

```
