# Motor stalling when current is reversed

**URL:** <https://forum.zubax.com/t/motor-stalling-when-current-is-reversed/1599>\
**Category:** Electric drives\
**Created:** [May 29, 2020, 10:28am UTC](https://forum.zubax.com/t/motor-stalling-when-current-is-reversed/1599 "2020-05-29T10:28:05Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![anemostec](https://forum.zubax.com/user_avatar/forum.zubax.com/anemostec/32/463_2.png) [@anemostec](https://forum.zubax.com/u/anemostec)\
**Post date:** [May 29, 2020, 10:28am UTC](https://forum.zubax.com/t/motor-stalling-when-current-is-reversed/1599/1 "2020-05-29T10:28:05Z")

</div>

Hello, what is the correct configuration to prevent the motor from stalling when decelerating the motor strongly?

we applied a sinusoidal signal to a motor 90% amplitude and with a 3hz frequency.  
we have a problem of the motor making strange noise as if it was stalling when the motor order is decelerating a lot. When we look at the esc\_status messages we realized that the stalling occurs only when the current is negative.  
Thanks in advance for your help.
