# Is it possible to tune one Myxa with motor and then copy its settings on many other ESC which will work with same motor

**URL:** <https://forum.zubax.com/t/is-it-possible-to-tune-one-myxa-with-motor-and-then-copy-its-settings-on-many-other-esc-which-will-work-with-same-motor/1042>\
**Category:** Electric drives\
**Created:** [August 7, 2018, 4:12pm UTC](https://forum.zubax.com/t/is-it-possible-to-tune-one-myxa-with-motor-and-then-copy-its-settings-on-many-other-esc-which-will-work-with-same-motor/1042 "2018-08-07T16:12:42Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![a6a3uh](https://forum.zubax.com/letter_avatar_proxy/v4/letter/a/3d9bf3/32.png) [@a6a3uh](https://forum.zubax.com/u/a6a3uh)\
**Post date:** [August 7, 2018, 4:12pm UTC](https://forum.zubax.com/t/is-it-possible-to-tune-one-myxa-with-motor-and-then-copy-its-settings-on-many-other-esc-which-will-work-with-same-motor/1042/1 "2018-08-07T16:12:42Z")

</div>

Hi! I have tuned my Myxa on the rig. Now I have 8 of them on the drone. Which are the ways to transfer parameters to all the other ESCs on the drone? Is it possible via CAN or I have to connect laptop to each through USB?

---

<div class="post-metadata">

**Author:** ![pavel-kirienko](https://forum.zubax.com/user_avatar/forum.zubax.com/pavel-kirienko/32/180_2.png) [@pavel-kirienko](https://forum.zubax.com/u/pavel-kirienko)\
**Post date:** [August 7, 2018, 4:48pm UTC](https://forum.zubax.com/t/is-it-possible-to-tune-one-myxa-with-motor-and-then-copy-its-settings-on-many-other-esc-which-will-work-with-same-motor/1042/2 "2018-08-07T16:48:08Z")

</div>

Yes you can do that via CAN. You can write a Python script to transfer the relevant parameters from one node to the others. There are no ready-made solutions for that yet.

> **[Open technology for real-time communications in cyber-physical systems](https://opencyphal.org/)**
>
> Cyphal is an open technology for real-time intravehicular distributed computing and communication
> based on modern networking standards (Ethernet, CAN FD, etc.).
> It is created to address the challenge of on-board deterministic computing and...

> **[GitHub - OpenCyphal/yakut: Simple CLI tool for diagnostics and debugging of...](https://github.com/OpenCyphal/yakut)**
>
> Simple CLI tool for diagnostics and debugging of Cyphal networks - GitHub - OpenCyphal/yakut: Simple CLI tool for diagnostics and debugging of Cyphal networks